Do You Want to Format Your Hard Drive?
The storage device in your computer is Hard Drive.
If the sector in your Hard Drive is corrupted then your computer can be really slow.
You need to understand basically that the formatting of your Hard Drive will remove all those information stored in it.
Therefore it is advisable to remove the valid information in it before attempting to format your hard drive.
It is always advisable to seek the assistance of an expert to do the following task.
If you are particular about doing it alone, risk yourself and follow these steps.
You need to be very cautious if you are formatting the Hard Drive because any fault in that can lead to permanent losing of the data.
Choose the best software to perform formatting.
You can also decide which operating system should be used after formatting the Hard Drive.
It is advisable to use a boot disk to install the OS.
To the floppy drive of your computer insert the boot disk and then you can start the system for formatting.
After booting completely a prompt appears.
In that you need to enter C:/s and then press the enter key.
This is to perform the formatting of the C drive.
And after finishing this formatting the files will be copied to that particular drive.
You can use the same command to format other drives in your system.
Just change the name of the drive and automatically other drives will be formatted.
After executing that command you system will warn you that the data will be lost from the particular non removable disk.
It will also ask you to press yes or no to proceed.
If you want to process then type yes and press the enter key.
Then your computer will start formatting the Drive.
The time and speed of formatting vary from one computer to another.
After completion a message will be given to you.
So you can make sure that your files for booting the system is also copied to the hard drive from the floppy disk.
Then again a message will be displayed for which you can press the enter key.
If there is any failure the error message will be displayed about the insufficient memory.
To solve this, a memory manager can be loaded to the system.
If the sector in your Hard Drive is corrupted then your computer can be really slow.
You need to understand basically that the formatting of your Hard Drive will remove all those information stored in it.
Therefore it is advisable to remove the valid information in it before attempting to format your hard drive.
It is always advisable to seek the assistance of an expert to do the following task.
If you are particular about doing it alone, risk yourself and follow these steps.
You need to be very cautious if you are formatting the Hard Drive because any fault in that can lead to permanent losing of the data.
Choose the best software to perform formatting.
You can also decide which operating system should be used after formatting the Hard Drive.
It is advisable to use a boot disk to install the OS.
To the floppy drive of your computer insert the boot disk and then you can start the system for formatting.
After booting completely a prompt appears.
In that you need to enter C:/s and then press the enter key.
This is to perform the formatting of the C drive.
And after finishing this formatting the files will be copied to that particular drive.
You can use the same command to format other drives in your system.
Just change the name of the drive and automatically other drives will be formatted.
After executing that command you system will warn you that the data will be lost from the particular non removable disk.
It will also ask you to press yes or no to proceed.
If you want to process then type yes and press the enter key.
Then your computer will start formatting the Drive.
The time and speed of formatting vary from one computer to another.
After completion a message will be given to you.
So you can make sure that your files for booting the system is also copied to the hard drive from the floppy disk.
Then again a message will be displayed for which you can press the enter key.
If there is any failure the error message will be displayed about the insufficient memory.
To solve this, a memory manager can be loaded to the system.
Source...