How to Refurbish Wheels
- 1). Clean the wheel using the grease remover. Put the grease remover in the disposable towel so it will be easier to spread on the wheel. Rub it all over the wheel surface. Focus on the nooks and corners of the wheels because a lot of grease tends to accumulate there.
- 2). Use the metal file to remove the scratches. Be sure you use the rough portion of the metal file, but don't rub too hard because the metal might become uneven.
- 3). Rub the wheel using the 80-grit sandpaper. This will remove the dirt as well any scratches from the metal file. When the sandpaper loses its roughness, replace it with another piece.
- 4). Rub the wheels with 150-grit sandpaper. This sandpaper will make the wheel smooth and shiny.
- 5). Use the 320-grit sandpaper for the final polishing. This will make the surface smooth as preparation for the wheel paint.
- 6). Brush the wheel paint on the wheel using the paint brush. Spread the paint in even strokes. Apply a thin coat so it will dry easily. Once it dries, apply another coat. Let the paint dry overnight.
Source...