How to Charge a Saturn's Car Battery
- 1). Check that the battery of the other vehicle is 12 volts; otherwise, jumping your Saturn's battery off of it could damage both vehicles.
- 2). Park the cars closely enough that the jumper cables reach between batteries, but not so close that the cars touch; otherwise, you could cause improper grounding.
- 3). Turn off your Saturn's radio, air conditioner, headlights, cigarette lighters and other electrical accessories; otherwise, their electronics could be damaged when the electrical system is jumped.
- 4). Turn off both vehicle's ignition.
- 5). Attach one red jumper cable clamp to the Saturn battery's positive (+) terminal. Remove the terminal cover first, if there is one. Then attach the other red clamp to the other car's positive terminal.
- 6). Connect the corresponding black clamp to the other car's negative (-) terminal.
- 7). Attach the other black clamp to an unpainted metal surface at least 18 inches away from your Saturn's battery. Note that you are NOT attaching the black clamp to the Saturn's negative terminal. Don't attach it near moving engine parts.
- 8). Start the other car.
- 9). Press UNLOCK on your key fob to disarm the car alarm.
- 10
Start the Saturn. If it doesn't start after several tries, it probably needs servicing. - 11
Disconnect the jumper cables in the correct order; otherwise, you can damage both vehicles. Disconnect the black negative clamp from the Saturn, then the black negative clamp from the other car, then the red positive clamp from the other car, then the red positive clamp from the Saturn.
Source...