How to Replace a 2007 Hyundai Santa Fe Fog Light Bulb
- 1). Park the vehicle on a level surface. Set the emergency brake. Be sure the ignition switch is in the off position. Wait a few minutes to allow light bulbs to cool.
- 2). Remove the front side cover retaining screw on the side with the defective fog light. Remove the side cover and set aside.
- 3). Remove the three retaining screws that secure the fog light assembly to the bumper cover. Slide the fog light assembly backward out of its mounts in the bumper cover. Take care not to damage the attached wiring.
- 4). Grasp the bulb socket and twist it a quarter turn counterclockwise to release it from the fog light assembly and pull it carefully out of the back of the assembly. Depress the light bulb into the socket and twist it a quarter turn counterclockwise to release the bulb from the socket. Be careful not to break the bulb glass. Pull the bulb out of the socket.
- 5). Insert a new bulb into the socket by lining up the small pins on the bulb base with the grooves in the socket and sliding the bulb in. Depress the bulb and secure it in the socket by turning it as far as possible in a clockwise direction.
- 6). Follow steps in reverse to reassemble the vehicle.
Source...