How to Make a 3D Bus
- 1). Trace all the sides of an old shoe box using a pencil on yellow construction paper, except the bottom. This will cover the shoe box and help transform it into a school bus. If you want to make a city bus use gray paper, while a London bus should be red.
- 2). Cut out the tracings with safety scissors. Glue each cut section onto the side of the shoebox where it was initially traced. Allow it to dry completely.
- 3). Trace a large bottle cap from a sports drink onto black construction paper for the wheels. Ideally you want to trace a circle that is approximately 3-inches wide. Trace four tires and cut them out.
- 4). Glue the four wheels onto the bottom of the long sides of the bus. Two wheels should be at the front left and right, while the other two wheels should be at the back right and left sides.
- 5). Draw a black door with black marker or crayon. Draw a front window at the front and draw side windows on the two long sides. Write "School Bus" on the side.
Source...