How to Remove the Door Panel From a 2005 Accord
- 1). Open the door. Using the Phillips-head screwdriver, remove the plastic piece behind the door handle, exposing two screws.
- 2). Remove the plastic piece that covers the bottom of the inside door handle.
- 3). Use the flat-head screwdriver to pry off the door-handle assembly.
- 4). Wrap the tip of the flat-head screwdriver with electrical tape to prevent any damage to the paint on the door.
- 5). Insert the flat-head screwdriver in between the door panel and the door and slowly pry the panel away from the door. There are clips holding the door panel onto the door; pull the door panel slowly to avoid braking any of them.
- 6). Remove the power-window assembly by unclipping the harness. Rotate the courtesy-light housing counterclockwise and pull it out of the door panel.
- 7). Lift the door panel up and over the lock pin and slide the door handle sideways as you pull off the door panel.
Source...