How do I Install a Vinyl Tile Floor?
- 1). Determine the amount of tiles you need for the space. Measure the length and width of the room to receive the flooring. An example would be a room that is 5 feet by 12 feet, meaning the room measure 60 square feet. A room this size would need 60 12-inch tiles.
- 2). Find the tiles you want to lay in the space. Locate a box to see how many tiles are included. Divide your amount of tiles needed by the number of tiles in a box to determine how many boxes you need. An example would be a room that needs 60 tiles and finding a box of tiles that includes 45 tiles. You would need two boxes to finish the project and have some tiles left over for future repairs.
- 3). Clean the floor surface. Gently sweep the surface with a broom and scrub away any buildup with a damp towel. Use a broom to remove any loose dirt once the surface is dry.
- 4). Pick a starting area to lay the tiles by standing at each opposite corner of the room to create an X in the center with a chalk line. This is a very important task because you must place the first tile at a perfect 90-degree angle.
- 5). Peel back the film from the backside of the tile and line the tile up to the X in the center of the room. Press the tile in place at this location.
- 6). Add tiles continuously in this manner to the top, bottom and sides of the starter tile by lining up the edges and pressing the tile in place.
- 7). Cut tiles to size to fit around objects and along walls. Set the tile upside down in place, and mark the excess area gently with a utility knife along a straight edge. Place the tile on a cutting surface, cut off the excess, and lay tile in the designated area. Continue this process until you cover the entire flooring area.
Source...