How to Reset a Honda Accord SRS Light
- 1). Straighten out a paperclip.
- 2). Pull down on the fuse panel cover under the steering column with your fingers to remove it.
- 3). Locate the small yellow plug in the fuse panel. This is the SRS power connector.
- 4). Unplug the power connector from the fuse panel.
- 5). Stick one end of the paperclip into one of the terminals on the end of the power connector, and the other end of the paperclip into the other terminal.
- 6). Turn the ignition on but do not start the engine. Wait for the SRS light to reset and shut off.
- 7). Shut off the ignition, pull the paperclip out of the SRS terminals and plug it back into the fuse panel.
- 8). Replace the fuse panel cover.
Source...