Six-Channel System

• 1). Insert the three-pin wire into the receiver's fourth channel, which is "CH4," then insert the gain wire to the receiver's gyro connector.
  
  
• 2). Power on both the helicopter and transmitter, then wait while the gyro automatically calibrates itself. A blinking LED light indicates the gyro has entered set up mode. Wait until the LED is a solid color, indicating the gyro is ready for flight.
  
  
• 3). Lift the left joystick to increase the throttle, raising the helicopter into the air. Fly the helicopter to an altitude of a few feet, then use the trim slider, which is located next to the right joystick, to adjust the vehicle's steering. Use the trim to offset any uncontrollable rotation; for example, if the aircraft moves right, slide the trim left until it maintains a stable hover.