How to Clean a Vacuum Cleaner HEPA Filter Instead of Replacing it
- 1). Unplug your vacuum and remove the dust cup. There are some brands that require you to unhook a latch, while others simply pull out.
- 2). Unlock the lid containing the HEPA filter. Most models have a twist lock you simply turn counterclockwise to unlock.
- 3). Pull out the HEPA filter insert. Some brands have hard casings while others have foam.
- 4). Fill the bucket with lukewarm water and dish liquid.
- 5). Put the whole filter into the bucket of soapy water. Allow it to soak for 5 to 10 minutes to loosen any hard build up.
- 6). Clean the filter while wearing the rubber gloves. Gently work your fingers into the grooves of the filter while intermittently sloshing the filter up and down in the water.
- 7). Rinse the HEPA filter thoroughly under the running faucet.
- 8). Fold your towel into fourths and set it on the counter or table. Place the wet HEPA filter on the towel and allow it to air dry completely.
- 9). Replace the dry filter into the dust cup and lock it back into place. Replace the dust cup into its proper position in the vacuum cleaner.
Source...