Instructions for a Lasko Remote Control Heater
- 1). Set your Lasko remote control heater on a level surface. Plug the power cord into an open AC outlet. When the device is first plugged in, the power light will turn on. It will stay on until the device is unplugged.
- 2). Press the "Power" button on the remote control. When it is turned on it will heat up to the maximum temperature. Wait until it reaches this temperature, then press the "Power" button again. The heater will then reach the lowest temperature. Wait for it to reach this temperature, then turn the device off.
- 3). Press the "Power" button again to turn the device back on. Press the "Temperature" button on the remote to change the temperature. The device has a row of indicator lights for each temperature, ranging from 60 to 90 degrees. The indicator light for the chosen temperature will blink until the room reaches that temperature.
- 4). Press the "Oscillation" button to make the heater rotate. Push it again to stop it from rotating.
- 5). Press the "Timer" button to set an amount of time the heater will run before turning off automatically. You can set the time to anywhere from one hour to seven hours. Pressing the button once will add one hour to the time.
Source...