Instructions

• 1). Determine the height at which to hang the panels and make a mark. The bottom of the panel should just brush the floor and the top should be at least a few inches above the top of the window.
  
  
• 2). Measure 3 inches out from window frame and make a second mark. This is where you will install the first bracket.
  
  
• 3). Place bracket over the mark you just made and trace the holes for location of screws.
  
  
• 4). Drill small pilot holes into wall for bracket screws. If there is no stud, you will need to use wall anchors to securely hold panels.
  
  
• 5). Line up the bracket over the pilot holes and attach bracket to the wall with screws. Repeat steps to install second bracket on opposite side of window.
  
  
• 6). Place panel curtain onto curtain rod and hang rod on brackets.