Play Yard Set Up

• 1). Remove the floorboard from around the play yard. When you are not using the play yard, the floorboard wraps around the outside and attaches with Velcro to contain the play yard frame.
  
  
• 2). Open the play yard, but do not push the center into the locked position at this point. First, you will need to pull up on the side rails until the rails lock into place. Once this is done, you can push on the center for the play yard until it is locked open.
  
  
• 3). Place the floorboard into the play yard. Pull the Velcro tabs through the slot found on each short end of the play yard and attach them to the bottom of the play yard to secure the floor in place.
  
  

Changing Station Assembly

• 1). Place a tray connector on each of the changing station bars. Press them toward the changing station until they lock into place.
  
  
• 2). Insert the rods on the tray connectors into the holes on one short end of the play yard. You will hear a click when the tray connectors are locked into the frame of the play yard.
  
  
• 3). Slide the changing table tray onto the tabs on the tray connectors.
  
  
• 4). Press the buttons on the tray connectors and pull up on the unit to remove the changing table assembly from the play yard.
  
  

Bassinet Assembly

• 1). Remove the floorboard from the play yard if you are converting it from a play yard to a bassinet. You will place the floorboard from the play yard in the bassinet once you have completed the bassinet assembly.
  
  
• 2). Attach the bassinet to the play yard by inserting the hooks along the edge of the bassinet into the loops on the inside of the upper rails of the play yard.
  
  
• 3). Insert the bassinet support rods into the sleeves on the floor of the bassinet. Slide the bars together to secure them in place.
  
  
• 4). Install the floorboard in the bassinet. As with the play yard assembly, you will insert the Velcro tabs through the short ends of the bassinet frame to secure the floorboard to the fabric.