Learn How To Effectively Use Your Own Free Broken Key Extractor
We locksmiths have a variety of tools for removing broken keys from locks. One of the more common tools I use is made of springy steel that is 5" long, 5/16" wide at the handle and .022" thick. There is a small tapered barb at the end of this tool that will dig or "bite" into the broken key piece so the piece can be pulled out. It is not absolutely necessary to invest in a broken key extractor tool. As long as the tool you use is made of sturdy metal, is narrow enough to enter the keyway, and has a barb to grab on to the broken key you will likely be successful. A scroll saw or jig saw blade should do the trick. When a deep cut gets too weak somewhere in the middle of a key, you end up with the front part of the key in the lock and the remainder in your hand. The good news is the lock is probably in the proper position for key removal.
Unless the lock has been in good working order (with the key going in and out smoothly) prior to the key breaking off, it is suggested that you spray a lubricant such as WD-40 or Tri-Flow in the lock's keyway first. You want the broken key piece to slip out as easy as possible and a dry or gummy lock will make the job harder. Then insert the broken key extractor into the lock's keyway so that the barb (or teeth) can contact the cuts of the key piece to be removed. You should be able to tell how far to insert the tool based on how much of the key you still have in your hand. You must then let the barb "bite" into one of the cuts of the broken key piece and give the tool a sharp tug towards you. The key piece should coming flying out. It's advised that you then take the two pieces of the key to your local locksmith or key center and get another one or two made.
When the first cut in the key is deep and gets too weak, you end up with just the head of the key in your hand. Most of the time what remains in the lock is the operating part of the key. That is, all key cuts that are necessary to operate the lock are stuck in the lock (if you are really lucky, enough of the key will be sticking out so a small pliers/tweezers are all you need to remove the broken piece-but that usually doesn't happen). You can test if the lock will operate by taking a small screwdriver and, using it like a key, try turning the lock cylinder. If you can turn the cylinder more than a few degrees to the right or left you have to make sure the lock cylinder is positioned so the key can be removed. You can get amazing value broken key extractors on the internet, and in some cases you can even get them free!
Unless the lock has been in good working order (with the key going in and out smoothly) prior to the key breaking off, it is suggested that you spray a lubricant such as WD-40 or Tri-Flow in the lock's keyway first. You want the broken key piece to slip out as easy as possible and a dry or gummy lock will make the job harder. Then insert the broken key extractor into the lock's keyway so that the barb (or teeth) can contact the cuts of the key piece to be removed. You should be able to tell how far to insert the tool based on how much of the key you still have in your hand. You must then let the barb "bite" into one of the cuts of the broken key piece and give the tool a sharp tug towards you. The key piece should coming flying out. It's advised that you then take the two pieces of the key to your local locksmith or key center and get another one or two made.
When the first cut in the key is deep and gets too weak, you end up with just the head of the key in your hand. Most of the time what remains in the lock is the operating part of the key. That is, all key cuts that are necessary to operate the lock are stuck in the lock (if you are really lucky, enough of the key will be sticking out so a small pliers/tweezers are all you need to remove the broken piece-but that usually doesn't happen). You can test if the lock will operate by taking a small screwdriver and, using it like a key, try turning the lock cylinder. If you can turn the cylinder more than a few degrees to the right or left you have to make sure the lock cylinder is positioned so the key can be removed. You can get amazing value broken key extractors on the internet, and in some cases you can even get them free!
Source...