How to Assemble a Kolcraft Deluxe Bassinet
- 1). Find the four leg tubes, which are long, thin metal rods with wheels on the bottom. Separate the two front leg tubes from the two back leg tubes. The back tubes have locks on top of the wheels. Look for two spots on each back tube that have "A" printed on them. These are the notches the rods, which are the straight poles, fit into.
- 2). Now pick up the front leg tubes and find the "A" notches on these. Fit each "A" end of a rod into one of the "A" notches on the leg tubes to form the bottom of the bassinet stand. There will be four "A" rods total.
- 3). Pick up the two remaining rods, which will have a "B" on each end. Find the "B" notches on the the front and back leg tubes and put the ends of these rods into them. Now you will have a rectangular frame.
- 4). Find the support wires, which look like arches with straight rods underneath them. Clip one onto each of the shorter ends of the frame, arch side facing up. You will hear a click when they are installed properly.
- 5). Pick up the basket and insert it into the frame by simply dropping the rectangular section of the canvas into the hole between the four bottom rods. It is rectangular and should fit snugly. Wrap the basket's top straps around the upper rods and snap them to secure. Do the same for the lower straps. You have now finished the stand for the bassinet.
- 6). Pick up the bassinet itself, which is mostly pre-assembled. Pull the center pad up so you can see the floorboard underneath. You will notice two metal support bars. Put one end of each bar into the hooks to the left and right, respectively, to make the floorboard more stable. Look for one bracket on each of the shorter ends of the bassinet. Slip these brackets through the slits in the canopy cover. Snap the rest of the canopy cover to the board.
- 7). Place the bassinet in its stand. The shorter ends tuck inside the support wires you installed in Step 4. Attach the straps at the bottom of the bassinet to the frame by simply closing the snaps around the poles.
- 8). Hold the canopy upright. You will notice two wheels on the bottom of it. Slide them into the brackets on the bassinet of the same size.
Source...