How to Cycle a Jenn-Air Ice Maker
- 1). Press the round "On/Off" button on the control panel to start your Jenn-Air ice maker. An oval green light will illuminate below the button.
- 2). Press and hold the "Speed Ice" button until the light below it illuminates to produce ice faster than a normal cycle.
- 3). Take out the two screws in the bottom access panel and the two screws on the sides of the grille plate to access the unit for bypassing the automatic sensor and starting a cycle manually.
- 4). Strip 1/2-inch of insulation from each end of the copper wire. Bend the wire into a U shape.
- 5). Insert the bare ends of the wire into the holes labeled "H" and "T" inside the unit at the bottom. Hold the wire by the insulation and do not touch the bare ends. When you hear a click, the Jenn-Air has started a new cycle.
- 6). Reattach the cover plate and bottom grille with the screws previously removed.
Source...