How to Change the Front Engine Mount in a Honda Odyssey
- 1). Raise the front end of the Honda Odyssey using the jack one side at a time, and lower the front end onto jack stands. Place wheel blocks behind the rear wheels. Slide under the engine, and place the jack under the oil pan.
- 2). Loosen the securing bolt on one of the motor mounts using the ratchet set. Place the wooden block onto the lift plate on the jack.
- 3). Raise the engine slightly using the jack. Remove the securing bolt from the mount, and pull the mount from between the engine and the frame.
- 4). Slide the new mount into the same position as the stock mount. Insert the securing bolt into the support holes, and slowly lower the engine back down to the frame.
- 5). Tighten the securing bolt to the specifications for that year model. Repeat for the opposite motor mount. Raise the front end, and remove the jack stands one at a time. Lower the Honda Odyssey to the ground.
Source...