Log Furnishings can be considered rustic because of its simple, casual, and natural design.
There are many plans for log furniture that you can choose from, but look for plans that are easy to follow and have a complete list of materials and equipment needed to work on your project.
It uses wood in its almost natural form, showing off the beauty of its material and grain.
You may need to learn a skill to work on this type of furniture.
That could be a major consideration when deciding whether this is the right DIY project for you.
You will need a drawknife and learn how to use it.
This is generally used for removing barks from the logs to make tenors that fit into the mortise.
Once you have mastered this skill, it will be easy to control your pieces.
Before using your logs, make sure that you sand this down properly.
You will want to have a nice smooth finish to it because the knots, bends, ridges and all imperfections of the wood will add to its beauty and charm.
Plans for log furniture will also support you to manipulate how your log furniture will look like by choosing the type of wood that will complement the design.
Choose only dry wood because it has the tendency to have moisture.
If you want to be on the safer side and want to avoid cracks later, choose a kiln dried wood.
These are woods that are professionally dried and will prevent some cracks.
When you have gathered all of your materials, you can start by cutting your wood to its size specification.
It will be advisable to use an extended table saw.
If you don't have one, you can always bring it to your local wood and hardware supplier and have them cut the pieces according to the plans for log furniture specifications.
If you are cutting the wood yourself, see to it that the pieces are cut smoothly and evenly.
When you have done that, send them down to a smooth finish.
Always check that the surfaces are sanded them evenly as this will affect the finished look of your end product.
You can use glue that's specifically for wood and screw to attach the different parts of the wood.
If you want you can also apply wood filler as a cover up for the holes.
These are just some suggestions on how to go about on some of the steps, but you will want to follow your blueprint and plan exactly as indicated.
The guidelines in the plans for log furniture may differ.
After you finish the assembly of the furniture, then you can proceed to the finishing process.
You will only really need a simple stain, so that the beauty of the log will show through.