Phillips Universal Remote Programming Instructions
- 1). Turn on your television. Since the remote has not been programed yet, you will need to push the "Power" button on the set.
- 2). Press and hold either "Setup" or "Code Search" on the Philips remote. The button you will push depends on the version of the remote that you have. If your remote has a light on it, it should start blinking. If there isn't a light on the remote, just hold the button down for 10 seconds.
- 3). Press the "TV" button on the remote to program your television set. This will send the signal to your TV so that the equipment will sync to the remote.
- 4). Use the up and down arrow keys to change the channels. Keep using them until your television responds, then power off the television. Your Philips universal remote will now have completed its programming and is ready for use.
Source...