Septic Systems & Soil Types

104 7

    Coarse Sand and Gravel

    • The pressure distribution septic system is used in coarse sand soils and gravel. The pressure system is different from a typical septic system in that the septic pump chamber is located between the tank and the drain field. The pump chamber stores wastewater or effluent until its levels reach a predetermined amount. Once it is high enough, the pump is triggered to activate and it pumps out the effluent into the drain field. Since it is pressurized, it is sent out of the perforated pipes with such force that it saturates the drain field quickly; it works much like a sprinkler does, except it's underground.

    Fine Sand and Loam

    • Soils that drain well, such as sand and loam, typically will have the traditional concrete septic tank system with a common drain field. In this septic system, a solid pipe leads from the tank to a distribution box, where it is then sent to two or more perforated pipes, which leach the water out into the soil.

    Impermeable Soils

    • Bedrock, a high ground water table or soils that do not drain well, such as thick clay soils, use a sand mound septic system. In this system, the septic tank is connected to a storage tank. The wastewater is sent from the home to the septic tank and then to the storage tank. Near the storage tank, perforated PVC pipes are buried above ground in a mound of sand. The mound of sand is covered by geotextile fabric, which is in turn covered by topsoil and grass or other vegetation. The wastewater runs from the storage tank to these pipes, where it is safely released into the sand to be processed by bacteria. The water seeps into the sand and slowly evaporates or is taken in by plant roots.

Source...
Subscribe to our newsletter
Sign up here to get the latest news, updates and special offers delivered directly to your inbox.
You can unsubscribe at any time

Leave A Reply

Your email address will not be published.