How to Clean Black Mold With Ease
All types of mold are bad for your health, but black mold is more hazardous.
Usually, black mould appears in dark, damp areas and tends to spread quickly.
Read on to know how to go about cleaning mould with ease.
First off, you should start searching your house for mould, especially areas like under sinks, inside of door frames, and behind walls, to name a few.
Signs, such as pungent odor, discolored ceilings and warped boards are indicative of black mould.
Black mould has greenish-black color and tends to grow fast in an area.
In case of severe mould problem, you should call in a professional mould remover.
For instance, if the mould has covered more than 10 square feet, then you should contact a professional.
Remove the Black Mold Start by removing sources that feed the mould.
You should repair leaky pipes, arrange better ventilation, and set up a dehumidifier.
In addition, you should dry the rooms where mould is a problem.
Seal the rooms affected with mould to prevent spores of mould from travelling via the air to other areas of the home.
Keep the doors shut tightly and make use of tape and plastic for covering doorways and vents.
You should put on a dust mask to protect yourself.
In addition, you should put on goggles and rubber gloves for protecting your eyes.
Do follow these safety measures or the mould can cause harm to you.
You can sprinkle water on the mould to prevent mould spores from traveling through the air.
As you remove items affected with mould, you should keep debris and dust in a small area.
Put affected stuff in a bag.
This will prevent mould spread.
Use a rag or brush for scrubbing off the mould.
You may try a mixture of dish soap and water for removing mould from solid surfaces like ceilings, floors, and walls.
Some types of mould spores cannot be seen with naked eyes; so, you should take the time to scrub nearby areas using the soap solution even if those areas look unaffected.
Clean the whole area using a disinfectant, such as a cleaner or bleach.
Get cleaners that are designed to treat distilled vinegar and black mould.
A disinfectant is used in order to remove remaining mould spores off a surface.
Once you have finished treating the whole area with the disinfectant, you should let the area dry out.
That is all.
Usually, black mould appears in dark, damp areas and tends to spread quickly.
Read on to know how to go about cleaning mould with ease.
First off, you should start searching your house for mould, especially areas like under sinks, inside of door frames, and behind walls, to name a few.
Signs, such as pungent odor, discolored ceilings and warped boards are indicative of black mould.
Black mould has greenish-black color and tends to grow fast in an area.
In case of severe mould problem, you should call in a professional mould remover.
For instance, if the mould has covered more than 10 square feet, then you should contact a professional.
Remove the Black Mold Start by removing sources that feed the mould.
You should repair leaky pipes, arrange better ventilation, and set up a dehumidifier.
In addition, you should dry the rooms where mould is a problem.
Seal the rooms affected with mould to prevent spores of mould from travelling via the air to other areas of the home.
Keep the doors shut tightly and make use of tape and plastic for covering doorways and vents.
You should put on a dust mask to protect yourself.
In addition, you should put on goggles and rubber gloves for protecting your eyes.
Do follow these safety measures or the mould can cause harm to you.
You can sprinkle water on the mould to prevent mould spores from traveling through the air.
As you remove items affected with mould, you should keep debris and dust in a small area.
Put affected stuff in a bag.
This will prevent mould spread.
Use a rag or brush for scrubbing off the mould.
You may try a mixture of dish soap and water for removing mould from solid surfaces like ceilings, floors, and walls.
Some types of mould spores cannot be seen with naked eyes; so, you should take the time to scrub nearby areas using the soap solution even if those areas look unaffected.
Clean the whole area using a disinfectant, such as a cleaner or bleach.
Get cleaners that are designed to treat distilled vinegar and black mould.
A disinfectant is used in order to remove remaining mould spores off a surface.
Once you have finished treating the whole area with the disinfectant, you should let the area dry out.
That is all.
Source...