How to Remove Motorcycle Decals
- 1). Clean the edges and surface of the decals using standard glass cleaner. This will allow the surface to be easily pulled up, and prevent foreign objects from stopping the process.
- 2). Begin with the decals at one end of the bike. You can work your way from here to the other end of the motorcycle.
- 3). Plug in a blow-dryer and turn it to the "hot" setting, then begin to heat up the entire surface of the decal. Make sure that the decal is very warm before continuing.
- 4). While still using the blow-dryer to keep the decal heated, begin pulling up an edge of the decal. Slowly pull the decal all the way off the plastic, while still keeping it warm.
- 5). Work your way across the entire bike, until you have all the desired decals removed.
- 6). Using an old rag and Goo-Gone (or any other remover) clean the areas where the decals were just located. This will remove any remaining residue from the back of the decals.
Source...