How to Fix the Xbox 360 3 Red Light Error From Home Without Delay
Learning how to fix the Xbox 360 3 red light error is something that can easily be achieved from home as long as you know what caused the error to begin with.
It is a very common error that to my knowledge only affects the Xbox 360 machine.
Gamers who own an Xbox 360 are aware of this and must be prepared to take steps to prevent it from ever happening.
However the good news is that with this article i will teach you how to repair the 3 red light error from the comfort of your own home.
All you have to do is follow the detailed steps outlined below.
How to Fix the Xbox 360 3 Red Light Error From Home: 1) If you realize that your Xbox 360 gets hot a lot and shows 3 flashing red lights then the solution to this will involve taking apart your Xbox to get to the problem.
2) Remove the cover and faceplate gently with a flat head screwdriver and locate the x-clamp which is attached to the motherboard.
3) The x-clamp is also where the heat sink and graphics chip are located, so it serves as a good marking point.
What we want to do here is find out the status of the graphics chip, so be on the lookout for anything out of the ordinary.
4) You now have to gently remove the heat sink so that you can get a better look at the graphics chip.
5) At this point you should see that the contacts where the chip connects with the motherboard is cracked and the connection is broken.
6) The proper way to re-establish the link is to use a soldering iron and a small amount of solder.
First of all you should align the parts to be soldered, and then use the iron to melt the solder right above the points.
7) The solder should melt pretty quickly and then dry quickly again forming a strong conductive link again.
If you are not very comfortable with soldering, then perhaps you could ask a friend who has a steady hand to help you out.
8) After you have allowed it to cool, replace the heat sink and make sure that it is firmly in place above the graphics chip.
9) The cover can now be firmly replaced, and everything should be back to normal.
10) Now that you know how to fix the Xbox 360 3 red light error you can even help some friends out because what you now know is a very valuable skill.
How Did I Learn How To Perform This Xbox 360 Repair? I was also once in your position because when my Xbox 360 broke down, I was at a loss for what to do and so i began to search the internet for a good tutorial on how to fix the Xbox 360 3 red light error.
I finally stumbled upon the chris jones Xbox 360 repair guide, and it worked well for me by breaking down all the necessary steps into a simple and clear format that was easy for me to understand.
It is a very common error that to my knowledge only affects the Xbox 360 machine.
Gamers who own an Xbox 360 are aware of this and must be prepared to take steps to prevent it from ever happening.
However the good news is that with this article i will teach you how to repair the 3 red light error from the comfort of your own home.
All you have to do is follow the detailed steps outlined below.
How to Fix the Xbox 360 3 Red Light Error From Home: 1) If you realize that your Xbox 360 gets hot a lot and shows 3 flashing red lights then the solution to this will involve taking apart your Xbox to get to the problem.
2) Remove the cover and faceplate gently with a flat head screwdriver and locate the x-clamp which is attached to the motherboard.
3) The x-clamp is also where the heat sink and graphics chip are located, so it serves as a good marking point.
What we want to do here is find out the status of the graphics chip, so be on the lookout for anything out of the ordinary.
4) You now have to gently remove the heat sink so that you can get a better look at the graphics chip.
5) At this point you should see that the contacts where the chip connects with the motherboard is cracked and the connection is broken.
6) The proper way to re-establish the link is to use a soldering iron and a small amount of solder.
First of all you should align the parts to be soldered, and then use the iron to melt the solder right above the points.
7) The solder should melt pretty quickly and then dry quickly again forming a strong conductive link again.
If you are not very comfortable with soldering, then perhaps you could ask a friend who has a steady hand to help you out.
8) After you have allowed it to cool, replace the heat sink and make sure that it is firmly in place above the graphics chip.
9) The cover can now be firmly replaced, and everything should be back to normal.
10) Now that you know how to fix the Xbox 360 3 red light error you can even help some friends out because what you now know is a very valuable skill.
How Did I Learn How To Perform This Xbox 360 Repair? I was also once in your position because when my Xbox 360 broke down, I was at a loss for what to do and so i began to search the internet for a good tutorial on how to fix the Xbox 360 3 red light error.
I finally stumbled upon the chris jones Xbox 360 repair guide, and it worked well for me by breaking down all the necessary steps into a simple and clear format that was easy for me to understand.
Source...