How to Bend Exhaust Tubing at Home
- 1). Secure the bending machine to a work surface with a clamp so the machine's tube groove is upright and level.
- 2). Move the short, top handle of the machine up to the top position and open the machine's tube latch.
- 3). Insert the exhaust tubing into the groove and close the latch to secure the tubing. Make sure it does not move during bending.
- 4). Lower the machine's handle to rest the roll dies against the tubing and to line the angle measure to the zero position. Close the latch.
- 5). Apply downward pressure on the handle until the degree indicator lines up with the necessary degree of bend.
- 6). Release the exhaust tubing by bringing the handle back up and opening the latch.
Source...