How to Clean Omni Stone Via Pressure Washing
- 1). Sweep the Omni stone pavers off with a push broom to remove surface dirt and leaves.
- 2). Close any doors and windows in the immediate vicinity of the cleaning area.
- 3). Connect a garden hose to the pressure washer by turning it clockwise. Turn the garden hose valve on in a counterclockwise direction.
- 4). Turn the pressure washer "On/Off" switch to the "On" position.
- 5). Squeeze the trigger of the pressure washer wand to emit water on to the Omni stone. Start on one side of the area and work in 3-foot sections to the other side of the stones. Hold the wand about 12 inches from the stone and rinse the entire area so it is thoroughly wet.
- 6). Turn the pressure washer to the "Off" position.
- 7). Place a mixture of one-part dish soap and one-part water in a bucket. Pour the solution onto the Omni stone and scrub it into the stones. Work in 3-foot sections to scrub the entire area.
- 8). Turn the pressure washer to the "On" position and rinse the area in 3-foot sections. When there are no apparent bubbles coming off the stones and the water is clear, the area is adequately rinsed.
- 9). Turn the pressure washer off, turn the garden hose valve clockwise to shut it off. Disconnect the garden hose from the pressure washer by turning it counterclockwise.
Source...