How to Reset Your Karr Keyless Remote
- 1). Insert the key in the ignition cylinder of your vehicle. Turn the ignition to the "On" position without cranking the engine.
- 2). Locate the "Valet" switch under the driver's-side dashboard panel. Toggle the "Valet" switch from "On" to "Off" three times, so that you've had the key in both positions three times, ending in "Off." A horn or chime will sound to indicate that you have accessed the vehicle's keyless entry programming mode.
- 3). Press and hold the center button on the Karr keyless entry remote for three to five seconds, and then release it.
- 4). Flip the "Valet" switch "On" and "Off" again. Wait for a horn or chime to sound twice before proceeding.
- 5). Press and hold the far-right button on the Karr keyless entry remote for three to five seconds; release the button.
- 6). Turn the ignition "Off" and remove the key from the vehicle's ignition cylinder.
Source...