How to Set Light Timers
- 1). Plug a digital light timer into an electrical wall outlet. Wait for at least 30 minutes for the built-in rechargeable battery to charge. The built-in rechargeable battery allows the timer to continue to work even when there is a power failure.
- 2). Reset any previous timer settings. Press the "Reset" button to erase all previous settings.
- 3). Set the current time on the clock. Hold the "Time" button and press "Hour/HR" until the current hour is displayed. Repeat the steps on the "Minute/MIN" button to display the current minute. Release the "Timer" button to save the current time. Note the AM and PM settings.
- 4). Set the "ON/OFF" times. Press and hold the "ON" or "SET" button, depending on your light timer model, until the digits blink. Press the "Hour/Hr" button to adjust to the desired hour display. Press the "Minute" button to set the "ON" minute. Release the "ON" button to save your "ON' time. Repeat the steps while holding down the "OFF" button to set the "OFF" minute and hour time. Note the AM and PM settings.
- 5). Plug your electrical appliance such as a lamp into the light timer.
Source...