How to Remove a Window on a 2005 Chevy Equinox
- 1). Disconnect the negative battery cable; there are numerous electrical wires within the door. Loosen the black cable clamp nut with a wrench and remove the cable from the terminal.
- 2). Remove all small trim panels from the door, including the mirror trim panel, the release handle trim and the pull handle trim. Some of these require a trim stick, while the release handle requires a screwdriver.
- 3). Remove the mounting bolts that are behind the trim panels using a wrench, and pry the trim panel off the door with a trim stick.
- 4). Peel off the watershield behind the trim panel.
- 5). Pull the weatherstrip seal off the window opening at the top of the door.
- 6). Lower the window until you can see the release tab at the bottom of the glass. Press this tab with a screwdriver and slide the glass down to remove it from the guide channels.
- 7). Push and guide the window glass up while tilting it outward to slide it out the window opening and remove it.
Source...